customer service | view cart
Question Was Asked By - Samantha K
Question:
I was wondering if you could tell me whether I would be able to open the rear hatch door of my 08 Town and Country mini-van when I have one of the hitch mounted cargo carriers on. Im debating between one that folds vs. a standard one. And if I have to remove the carrier in order to get my rear door open anyway, then theres not much of an advantage to getting a folding one. Any info you might be able to provide would be appreciated. Thanks.
asked by: Samantha K
Expert Reply:
When the 24x60 Folding Cargo Carrier for 2 inch Trailer Hitches is installed on the back of your Town and Country Mini Van you will be able to open the rear hatch as long as the cargo you have loaded on the carrier is not too high. The taller the load the more likely that it will interfere with the rear door. You can do some measuring to see how high the load could be before causing a problem. At the back of your vehicle, measure straight out from the center of the hitch pin hole 17-3/4 inches then 4-1/2 inches up from the top of the hitch opening. This is where the load platform will start when the carrier is installed on your van. Next you can swing the door open and measure or just get an idea of how much clearance you will have for the load on the cargo carrier. When the carrier is folded you will not be able to open the rear door without lowering the carrier first. When selecting a carrier the longer the measurement from the center of the hitch pin hole to the closest edge of the carrier will give you the most clearance for your hatch to open. I have posted links below to some of our 2 inch hitch cargo carriers that may work for you. Don't forget a pin and clip or a 2 inch hitch lock to secure your carrier to the hitch.
expert reply by: Bob G
Products Referenced in This Question
Trailer Hitch Receiver Lock - Padlock Style for Class III, IV and V Trailer Hitch Receiver
Product Summary:
Hitch Lock
Padlock Style
Chrome
Product Specs:
2 Inch Hitch
3-1/2 Inch Span
24x60 Folding Cargo Carrier for 2" Trailer Hitches
Product Summary:
Flat Carrier
Folding Carrier
Steel
500 lbs
24 x 60 Inch
Product Specs:
2 Inch Hitch
10 Square Feet
Class 3
23x56 Railed Cargo Carrier for 2" Trailer Hitches
Product Summary:
Flat Carrier
Fixed Carrier
Steel
600 lbs
23 x 56 Inch
Product Specs:
2 Inch Hitch
7.8 Square Feet
Class 3
Trailer Hitch Receiver Lock - Flush Design for 2" Trailer Hitches
Product Summary:
Hitch Lock
Deadbolt Style
Chrome
Product Specs:
2 Inch Hitch
2-5/8 Inch Span
Pin and Clip For Class III, IV and V Trailer Hitch Receiver
Product Summary:
Pins and Clips
Hitch Pin
Product Specs:
2 Inch Hitch
2-1/2 Inch Hitch
5/8 Inch Diameter
Product Page this Question was Asked From
24x60 Folding Cargo Carrier for 2" Trailer Hitches
Product Summary:
Flat Carrier
Folding Carrier
Steel
500 lbs
24 x 60 Inch
Product Specs:
2 Inch Hitch
10 Square Feet
Class 3
Have a question for the experts, click here.
Questions about part number 52018F
Recommendations for Preventing Rust on a Cargo CarrierRelated Questions
Recommendations for Preventing Rust on a Cargo Carrier