customer service | view cart 
Question Was Asked By - Paul
Weight Distribution and Brake Controller for a 2007 Audi Q7
Question:
I tow a Trailmanor 2720 ~4000lbs with a weight distribution hitch ... it was a bit too heavy for my 02 Acura MDX which was rated for 3500lbs. I now have an 07 Audi Q7 and need to add a receiver. A couple of questions... 1 the receiver listed on your pages for the Q7 said weight distribution: not available... What does that actually mean? Will it work with my trailer and wd hitch? 2 The Q7 says pre-wired for towing. Do you know if the brake controller is actually built in to the car I doubt it, but someone told me it might be. 3 Assuming that I do need a brake controller... is there an elegant model or good way/place to install one of those... My MDX had a controller installed by Uhaul to the right of the steering wheel where my right leg often hits it on entry/exit. Its ok, just a bit ugly/awkward and was wondering it there is an alternative. thanks
asked by: Paul
Expert Reply:
The hitch for the Audi Q7 does not have a weight distribution rating because the Curt hitch will not increase any weight by adding the system as some hitches do. So you can install the weight distribution, however the weight will stay at 6,000 lbs which is plenty for your application.
As far as the brake controller, you will not have a controller installed in the vehicle, but you may have the vehicle pre wired for a controller. This means there may be a harness from the factory/dealer that will plug into the dash and then you can splice the controller directly into that. Our best selling brake control is the Tekonsha Prodigy, part number 90185. This is a sleek controller and has a modern design, but also offers the functionality of any other controller. When installing this item, sit in the driver's seat to check where it would be comfortable for you to sit and still be room for the controller.
expert reply by: Paige
Product Page this Question was Asked From
Tekonsha PRODIGY Brake Controller - Proportional
Product Summary:
Proportional Controller
Product Specs:
2 - 8 Brakes
0 – Pos 70 Degrees
more information...
Have a question for the experts, click here.
Questions about part number 90185
Brake Controller Kit for a 2005 Dodge DakotaInstallation of Power Wire to Brake Controller and 7-Way Connector on Motor Home
Inatallation and Wiring Harness for a Brake Controller on a 2010 Honda Pilot?
Tekonsha prodigy brake controller and Break-away Kit
90185 Prodigy Brake Controller Installation on a 2007 Hummer H3
Plug and Play Harness for a Brake Controller on a 2007 Chevy Avalanche
Fuse for a Brake Controller on a 2009 Chevy Silverado
"SH" Signal on a Brake Controller
Brake Controller Wiring on a 2007 GMC Yukon
Weight Distribution and Brake Controller for a 2007 Audi Q7
Propoertional Brake Controller for a 2007 GMC Yukon
Installing a Brake Controller on a 2008 Chevy Suburban
Brake Controller Installation on a 1995 Ford F-150
Brake Controller Wiring for a 2007 Chevy Suburban
Brake Controller for a 2003 Chevy Silverado
Brake Controller for a 2000 Chevy Blazer
Brake Controller for a 2008 Dodge Ram
Brake Controller for a 2008 GMC Yukon Denali
Brake Controller Compatibility with an Old Trailer
Wiring a Brake Controller on a 2005 Ford E-350 Van
Brake Controller Wiring on a 2007 Hyundai Entourage
Brake Controller for a 2004 Chevy Tahoe
Brake Controllers are Necessary for Electric Trailer Brakes to Perform Correctly
Brake Controller for a 2007 Chevy Trailblazer
Brake Controller and Wiring for a 2003 Dodge Ram
Related Questions
Trailer Brakes Grab and Lock With Tekonsha Voyager 9030 Part # 39510Brake Controller WIring Adapter for a 1999 Chevy Suburban
Installing a Brake Controller on a 1990 GMC Pickup 6 Foot Bed
Wiring a Brake Controller on a 2007 Chevy Silverado
Installing a P3 Brake Controller on a 2008 Ford F-450 with a Factory Brake Controller
Trouble Shooting Draw-Tite Activator part # 5100 That Functions Only When Manual Switch is Pressed
Brake Controller and Wiring for a 2007 GMC Sierra with New Body Style
Wiring a HiddenHitch/Pilot Brake Controller to a 2007 Chevy 2500HD Classic Body
How to Set Up a Hopkins Agility Brake Controller Part # HM47294
Wiring a Tekonsha Voyager Brake Controller part # 39510 to 2006 Dodge Ram 2500
Brake Lights Coming On When 2008 Dodge Pickup is Parked
How to Wire a Brake Controller When Using ETBC7
Wiring Diagram Tekonsha Voyager Brake Controller # 39510
Brake Controller Kit for a 2005 Dodge Dakota
Brake Controller Troubleshooting on a 2001 Dodge 2500 4X4
Installation of Power Wire to Brake Controller and 7-Way Connector on Motor Home
Tekonsha P3 TE90195 for Ford F-350
Does Tekonsha P-3 Brake Controller part # 90195 Include Both Style Mounting Brackets
Amperage Capacity for Power Wire on a Factory 7 Way on a 2009 Chevy Suburban
Brake Controller Wiring Harness For a 2009 Ford F-150 Pickup
Controller Display Lights on Valley Odyssey Electric Trailer Brake Controller # 52810 on a 2006 GMC
Brake Controller Wiring Harness Location for a 1999 Dodge Ram
What Parts Are Needed to Install DrawTite Time Delay Brake Controller part# 5100 on 2005 Ford F-150
Brake Controller troubleshooting on a 2003 Suburban 1500 4X4
Wiring # 5500 Draw-Tite Activator II Brake Controller On 2009 Ford F-250 and F-350
