Replacement Fifth Wheel Legs for Curt Q24 Fifth Wheel Hitch  

The Curt A25 #C16046 and Q25 #C16049 are both excellent 5th wheel hitches however there are a few upgrades on the newer Curt A25 #C16049 that make it the superior hitch and my personal recommendation. The primary difference between the two models is…

We have just what you need. The leg kit you need is the Curt Q25 leg kit part #C16963 which will allow your to install your Curt Q25 head in factory above the bed rails.

Both the Curt A25 #C24FR and the B&W Companion #BWRVK3715 have a 25,000 pounds towing and 6,250 pounds of vertical load capacity, but there are a few differences between them and I have a couple listed below. First, The B&W can be adjusted…

The Replacement Base Legs for Curt Q5 and Q24 5th Wheel Hitches #16125-SK13 and the Replacement Base Legs for Curt Q25 5th Wheel Trailer Hitch #C16963 are slightly different. My contact at Curt said the bolt pattern in the same, so you can put either…

The Curt A25 5th Wheel Trailer Hitch part #C16046 and the Curt Q25 5th Wheel Trailer Hitch part #C16049 are both a confirmed fit for your 2017 Ram 3500. The Curt A25 hitch is the newer version of the Curt Q25 hitch which features a stronger head unit…

It looks like you are referring to step 7-d of the installation instructions for the 5th wheel trailer hitch installation kit #RP50140-58, linked for reference. Step 7 refers to installing the rear frame brackets under the truck. The holes drilled…

I measured the jaws and on both the Q25 #C16265 and the Q20 #C16130 the thickness of both is 1/2 inch. The differences are most obvious in the vertical load limit and the gross towing weight ratings. I reached out to my contact at Curt and the jaws…

The Curt Q20 5th Wheel Trailer Hitch part #C16130 only weighs around 135 lbs but you can break the hitch up into parts to help with removal; the head, the base, and the center section.

The total weight of the Curt A20 5th Wheel Trailer Hitch Item #C16541 Is roughly 220lbs, but the head can be separated from the base by removing the pin to make it easier to remove.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…