Question Was Asked By - Michael

Installation of the Sealed, Thin Line, Over 80" LED Stop/Turn/Tail Light, Part # STL69RCB

Question:

Please advise on correct wiring of the 3 wire leads R, W, B on this light part # STL69RCB to the wire leads on a flat four W, BR, Y, G. Thanks

asked by: Michael

Expert Reply:

This particular lamp is meant to be used in pairs, one on each side of the rear of the trailer. The red wire on the drivers side lamp is meant to connect to the yellow wire from the trailer connector, and on the passenger side lamp the red wire connects to the green wire from the trailer connector. The black wire on each would connect to the brown wire from the trailer connector and the white wire on each lamp would be grounded to the trailer.

A chrome bezel, part # A69CB is also offered.

expert reply by: Mike L

Have a question for the experts, click here.