Question Was Asked By - Philip

What is the Hitch Clearance and What Angle does the Softride Element Parallelogram Tilt

Question:

What is the clearance to the back edge of this rack using the 2 receiver and what is the angle that the rack opens down to? Thank you.

asked by: Philip

Expert Reply:

The distance from the center of the first hitch pin hole, the measurement is 7-1/4 inches from center of hole to the back of the upright bar is 7-1/4 inches, when used in the 2 inch configuration. The upright bar goes from about 90 degrees when locked in place to 45 degrees when tilted all the way out.

expert reply by: Patrick B

Have a question for the experts, click here.