How to remove Tail Light Capsule From Submersible Trailer Taillights  

Our installer here will spray the light with some lubricant around where the light meets the grommet and then will use a screwdriver to pry the light out first, and then the grommet. If you check out the install video I attached you will see this…

We can get you set up to tow your Jayco trailer with the 6-Way connector. First, on your 2002 Dodge Durango, you will need to install Tow Ready Custom Fit Vehicle Wiring, #118334. I have included a link to the installation details and a link to a…

When wiring a 7-Way on your trailer with 5 wires, your green wire will be right turn/brake, the yellow wire will be left turn/brake, the brown wire will be the taillights, and the white wire will be the ground. You will want to find out if the blue…

The red wire is the turn signal wire and will be run to the green wire of your harness if its the right turn signal side, and the black wire will run to the brown wire of your harness. The yellow wire from your harness will run to the left turn…

Since your 2002 Dodge Durango doesn't have the factory tow package the trailer wiring harnesses install by plugging in behind both tail lights. I recommend the Tekonsha, part #118334 for a quality 4-way connector. I've linked a video showing…

The best solution for your situation would be to use a circuit tester, like part #PTW2993, to wire your trailer wires to a seven-way trailer connector, like part #A7WCB. Wiring by function is the best way to make sure you have the trailer connector…

Trailers use a combined wiring system meaning the brake lights and turn signals are on the same circuits. Since the brake lights are working on the trailer, and because you have tested the vehicle wiring and it is working properly, there is most…

Your Wesbar 102640 trailer light features a sealed capsule so the bulb itself cannot actually be replaced. I recommend simply replacing the light assemblies with the Wesbar #403026 and #403076. These are the newer/current generation model lights to…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…