Question Was Asked By - Heather

Recommendation For LED Camper and Flatbed Tail Lights for a 2010 Ford Ranger

Featured Help Information

Trailer Lights - Tail Lights LED Light

Brake Controller Installation: Starting from Scratch

Trailer Wiring Diagrams

Question:

I am having a new flatbed built for my 2010 Ford Ranger. I have a camper that I place on the bed and the camper covers the truck lights when traveling with the camper installed. As on my old truck, I will connect the truck lighting and power to the camper via a cable and two 7 pin connectors. The extra pins will supply 12V DC to the camper. What LED lights would you suggest for the flatbed? What LED lights would you suggest for the camper?

asked by: Heather

Expert Reply:

I would recommend the Sealed, 6-1/2 inch Oval LED Trailer Stop, Turn and Tail Light, 10 Super Diode, item # STL72RB, for both the truck bed and the trailer. To mount these lights you will need a Trailer Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, item # BK70BB, and a Rubber Grommet, item # A70GB. To wire the lights you will need either the straight Pigtail, item # A45PB, or a the right angle Pigtail, item # A47PB. I have used these lights on a car hauler and they work excellent and are very bright.

To wire the 7-way connector you can use our 7-Way brake controller wiring kit, item # ETBC7, which includes all of the wire, connectors, circuit breakers, mounting bracket, and connectors needed. You will also need a trailer end connector, item # PK12706.

I have provided a link to all of our LED trailer lights for you to review.

expert reply by: Bob G

Have a question for the experts, click here.