Question:
my bike has all seperate wires right, left, tail,stop and ground.. my new trailer has a flat 4 pin connector. is this what I need to wire my bike? 95 HD FXST softail
asked by: Jasen
Expert Reply:
Yes, I would use the Upgraded Taillight Converter by Tow Ready with 4 Pole End, item # 119130, to wire your bike for towing a trailer with a 4-Way connector. I also ran this by our installation tech and he agreed that this is the unit to use.
If your trailer has extra lighting on it, more than just two taillights and two side marker lights, you may want to consider a powered Modulite, like the Upgraded Modulite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 119176, to eliminate the extra amperage draw on your taillight system. The only extra wiring involved is routing a wire, via a inline fuse, to the positive post of the battery on your bike. You can use the POWERLINE! Installation Kit, item # 31827, to complete the installation.
expert reply by: Bob G
Products Referenced in This Question
DISCONTINUED - Upgraded Modulite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connec
Product Summary:
Trailer Hitch Wiring
Multi-Plexed System
2 Wire System
3 Wire System
Product Specs:
Plug and Lead
4 Flat
Product Summary:
Trailer Hitch Wiring
Accessories
Product Specs:
Power Wire Installation Kit
Product Page this Question was Asked From
Upgraded Taillight Converter by Tow Ready with 4 Pole End
Product Summary:
Trailer Hitch Wiring
Converter
3 Wire System
Universal Fit
Product Specs:
4 Flat
Replacing Incandescent Bulbs with LED Bulbs on a Travel Trailer and Adding Backup LightsDiagnosing 2003 Dodge Ram 2500 7-Way not Functioning Trailer LightsTrailer Lights on a Cargo Carrier Flash Rapidly with Brake Applied on a 2008 Harley Ultra ClassicTroubleshooting OEM 4-Pole Trailer Connector on 1998 Toyota Land CruiserUsing Trailer Wiring Converter to Add LED Tail Lights to 2005 Harley Dyna Glide Voyager Trike KitHow to Get Separate Turn Signals and Brake Lights to Work on a Trailer7-Way Trailer Wiring and Brake Controller Recommendations for a 2002 Toyota TundraHow To Wire Separate Turn Signals And Backup Lights On A Trailer With a 4-Flat ConnectorTroubleshooting No Brake Lights or Turn Signals on A Trailer Towed by a 2004 Chevy SilveradoRecommended Wiring for a 2010 Nissan Altima SedanHave Running Lights and Trailer Brakes Function Properly but No Brake Lights or Turn Signals.Troubleshooting Tail Light Converter and Tail Light Circuit on Trailer Towed by 2007 Nissan FrontierIs an Aftermarket Wiring Harness for a 2010 Harley Davidson UltraClassic AvailableHow To Wire a Trailer Harness on a 2000 Mitsubishi MonteroChanging a UK Wired Tailer to a USA 4 Wire System for Use with a Lincoln NavigatorHow To Wire a Harley Ultra Classic with a 5-Pole Round and a Trailer with a 4 Pole FlatWiring a 1995 Harley Davidson FXST for a 4-Way Trailer Connection2 Wire to 3 Wire Tow Vehicle Taillight Adapter for 2006 Chevrolet ColoradoTrailer Lights Not Working with 7-Way Trailer Connector on a Toyota LandcruiserWiring a 1997 Honda CR-VTail Light Converter for a 2000 Pontiac MontanaTaillight Converter for a 2001 Kia Sportage
Instructions for 119176
