Can you use this bracket D320 for a left hand sway bar? It looks like you could just flip it over for the left side.
asked by: John B
You can use the Curt Ball Mount with Sway Control Bracket, # D320, in the rise position to have the sway control bracket on the left side, but you will want to remember that doing this will raise the height of your trailer tongue by almost 3 inches. This can create additional sway issues even with a sway control bar installed.
Another option that you can look into is using a weld on sway control tab like part # 3442. This tab can be welded to the side of your current ball mount to provide a location for the sway control ball.
expert reply by: John H
Products Referenced in This Question
Product Page this Question was Asked From
Featured Help Information