Will this reese adapter designed for the 2013 fords fit A demco hijacker ultra slide?
asked by: Duane S
The Reese Elite Series Underbed Rail Adapter, # RP30156, will accept standard 5th wheel trailer hitches that fit in above the bed rails. The mounting slots on the adapter are spaced approximately 22 inches apart on center, front to back. And side to side there are 2 sets of slots. The inner most set measure is 20-1/2 inches apart on center and the outer set is 29 inches apart on center.
If your hitch fits in standard above the bed rails and the measurements I have provided match up to what your hitch requires then you can use it in the adapter. Of course it also goes without saying that you must have the Reese under-bed Elite installation kit already in the truck for the adapter to fit into.
expert reply by: Michael H
Product Page this Question was Asked From
Fifth Wheel Installation Kit
Featured Help InformationInstructions for RP30156