customer service | view cart 
Question Was Asked By - Jim E
Installation of Brake Controller in Vehicle with CB Radio, 2004 Toyota Tundra
Question:
The instructions direct that the controller not be installed near a CB, how far away from the CB does the controller have to be so it doesn’t interfere with the brake controller? I will be installing the controller in a 2004 tundra double cab and RV, I already have the CB installed in both by the driver’s right knee.
asked by: Jim E
Expert Reply:
Most people mount a brake controller by the drivers right knee or higher. You will need your brake controller mounted within your reach and 12 to 18 inches away from the CB radio, so I suggest mounting it on the left side of your steering column. If your vehicle came with a tow package, I would also suggest the Valley Brake Control Adapter for Toyota and Lexus, part # V30502, to reduce brake controller installation time.
expert reply by: DeAnne T
Products Referenced in This Question
Product Page this Question was Asked From
Valley Odyssey (TM) Electric Trailer Brake Controller - Proportional
Product Summary:
Proportional Controller
Product Specs:
2 - 8 Brakes
Neg 90 – Pos 90 Degrees
more information...
FAQs / Article / Videos about this Product
Helpful Link
Have a question for the experts, click here.
Questions about part number 52810
Brake Lights Coming On When 2008 Dodge Pickup is ParkedInstallation of Brake Controller in Vehicle with CB Radio, 2004 Toyota Tundra
T-One Vehicle Wiring Harness for 1993 Chevy Suburban
Valley Brake Controller 52810 Installation Instructions
2001 Dodge Ram Pickup Trailer Hitch, Brake Controller, Wiring and Towing Parts
Brake Controller Causing Brake Lights to Stay on
Brake Controller Wiring for a 2007 Chevrolet Suburban
Related Questions
Trailer Brakes Grab and Lock With Tekonsha Voyager 9030 Part # 39510Brake Controller WIring Adapter for a 1999 Chevy Suburban
Installing a Brake Controller on a 1990 GMC Pickup 6 Foot Bed
Wiring a Brake Controller on a 2007 Chevy Silverado
Installing a P3 Brake Controller on a 2008 Ford F-450 with a Factory Brake Controller
Trouble Shooting Draw-Tite Activator part # 5100 That Functions Only When Manual Switch is Pressed
Brake Controller and Wiring for a 2007 GMC Sierra with New Body Style
Wiring a HiddenHitch/Pilot Brake Controller to a 2007 Chevy 2500HD Classic Body
How to Set Up a Hopkins Agility Brake Controller Part # HM47294
Wiring a Tekonsha Voyager Brake Controller part # 39510 to 2006 Dodge Ram 2500
Brake Lights Coming On When 2008 Dodge Pickup is Parked
How to Wire a Brake Controller When Using ETBC7
Wiring Diagram Tekonsha Voyager Brake Controller # 39510
Brake Controller Kit for a 2005 Dodge Dakota
Brake Controller Troubleshooting on a 2001 Dodge 2500 4X4
Installation of Power Wire to Brake Controller and 7-Way Connector on Motor Home
Does Tekonsha P-3 Brake Controller part # 90195 Include Both Style Mounting Brackets
Amperage Capacity for Power Wire on a Factory 7 Way on a 2009 Chevy Suburban
Brake Controller Wiring Harness For a 2009 Ford F-150 Pickup
Controller Display Lights on Valley Odyssey Electric Trailer Brake Controller # 52810 on a 2006 GMC
Brake Controller Wiring Harness Location for a 1999 Dodge Ram
What Parts Are Needed to Install DrawTite Time Delay Brake Controller part# 5100 on 2005 Ford F-150
Brake Controller troubleshooting on a 2003 Suburban 1500 4X4
Wiring # 5500 Draw-Tite Activator II Brake Controller On 2009 Ford F-250 and F-350
Wiring and Display of the Draw tight Activator 2 on a Nissan Titan
