How are the AMP Research BedSteps for Dodge Ram Installed

Expert Reply:

The step is mounted using existing bumper/frame mounting points. You will need a torque wrench, a 15mm socket, 17mm socket and a 3/16 inch allen key. First you will install the mounting bracket to the step. You will then remove two nuts from the bumper bracket and install the mounting bracket to the bolts and replace the nuts.

The installation is quite easy and should not take too long the biggest concern would be to clean the threads of the bumper bracket bolts and lubricate them before starting installation so that any road grime or corrosion does not ruin the threads when removing the existing nuts.

expert reply by: Bob G