Question Was Asked By - Janice

Installation Hardware Needed to install a Custom Fit Trailer Hitch Receiver on a 2005 Nissan Murano

Question:

Do I need to install an Armature if I install this hitch on my Murano? I called nissan to get a quote, and they insist I must have the armature. I will only be hauling a small trailer with a 2 person boat on it, or kayaks, at the most, 300 pounds, trailer included. Thanks!

asked by: Janice

Expert Reply:

Everything you need to install the Hidden Hitch Class II Trailer Hitch, part number 90073, is included with the hitch. I have not heard of any armature or other parts that are needed to install the hitch or for the hitch to perform properly. As long as you stay within the Hitch or vehicle towing capacity whichever is less you will have no problem towing with this hitch.

Instructions and a video for installing the custom fit trailer hitch on a 2005 Nissan Murano are on our web site and neither one show any part needed other than the included hardware. If you watch the video and read the instructions before hand you will not have any surprises when installing the hitch. Using a tie down strap when lowering the exhaust is a good tip that will make the install easier and protect the exhaust.

The only items you may need in addition to the hitch is a properly sized ball and trailer wiring. Our best selling hitch balls for Class II hitches are the, part number 19256 and 19258. The wiring harness for your 2005 Nissan Murano is, part number 55571, and will be installed inline with the vehicle taillights. A no drill bracket is also recommended with the wiring harness and the part numbers for that are 18144. and 18140.

expert reply by: Bob G

Have a question for the experts, click here.