Question Was Asked By - dwight s

Wiring Instructions for Pilot Time Delayed Brake Controller on 2007 Nissan Titan

Question:

could you supply a wiring diagram to connect this controller to the oem harness supplied with a 2007 nissan titan?

asked by: dwight s

Expert Reply:

To connect the Pilot 2-6 Brake Electronic Brake Controller to your 2007 Nissan Titan you will need the, 20266, Nissan brake control wiring adapter (see link below). The wires on the adapter are spliced to the like color wires on the brake controller. The Wire colors are red is the brake switch wire, white is the ground, blue is the feed to the trailer brakes and the black is the power feed that connects to the battery. With this harness you will be able to connect to the manufacturer supplied connector and if you have a factory installed 7-way trailer connector at the back of your vehicle your install will be complete. If you do not have a factory installed 7-way trailer connector then you will have to complete the wiring with the, 30608, factory style 7-way and 4-way trailer connector for Nissan. The connector for this is found at the back of the vehicle above the spare tire or behind the bumper on the left side. This kit comes with the needed relays to activate the trailer wiring harness (see instructions link). You may also want to get a no drill mount bracket, 18136, to make installation an easy no drill procedure.

expert reply by: Bob G

Have a question for the experts, click here.