Question:
what sidewinder hitch would i need for a 2000 28 ft prowler.
asked by: Jim
Expert Reply:
To determine which sidewinder will fit your 2000 28 ft Prowler, we will need to know the make and model number of your current pin box. This information can typically be found on the pin box itself or from your dealer. Sidewinder pin boxes are designed for specific pin boxes. The Fifth Airborne 16K Sidewinder, # ST400-SW16K, that you referenced is designed for use with Leland 7910, 7920 and 7921 pin boxes.
If you are unable to determine the make and model number of your pin box, then there are some measurements that you can take that will tell us which pin box you have. I have attached an article that explains where to measure on your pin box. At the bottom of the article is a chart that will tell you what pin box you have based on your measurements.
I have also attached an article on sidewinders. In this article you will find a list that shows the correct sidewinder for your pin box. You could also just send me the make and model number of your pin box or the measurements that you took and I can recommend the correct pin box for you.
expert reply by: John H
Have a question for the experts? click here.
Product Page this Question was Asked From
Parts Needed to Tow a 5th Wheel Trailer with a 2011 Toyota Tundra with 5-1/2 Foot Bed5th Wheel Hitch Comparison for 2008 Dodge 2500 SBSidewinder Recommendation and Measurement for a 1998 Terry 5th Wheel and 2008 Ford F150 Short BedCorrect Parts Needed To Use Air Safe Air Ride 5th Wheel and Gooseneck Hitch On 2003 Ford F-250Which Sidewinder Works for a 2010 Dodge Ram 3500 Short Bed Towing a Montana 36 Foot Fifth WheelCould I Use a Sidewinder to Pull a 5th Wheel Trailer with my Ford F150 Crew Cab with a Short BedWill A Sidewinder Give Enough Clearance For 5th Wheel Hitch On 2008 Ford F-150 Supercrew Short-BedDifference in Leland Pin Boxes And What Sidewinder Needed For 2006 Dodge Ram
Instructions for ST400-SW16K
