Question:
of the various hitches that you sell which do you recommend for secure trailer towing for a 2010 VW Jetta TDI which one has the most clearance which one looks the best on the car which 4 flat wiring system is appropriate and the easiest to install
asked by: Evan B
Expert Reply:
Out of all of the hitches available for a 2010 Volkswagen Jetta, I would go with the Curt hitch # 11072. It is going to offer approximately 9 inches of ground clearance from the bottom of the receiver to the ground. The round tube design generally looks better on vehicles, and you can see it in the video I have linked.
All of the hitches install in basically the same way and have the same capacities so any of them would be safe and secure for towing a trailer up to 2,000 pounds.
The Curt hitch does come with the correct ball mount, pin, and clip so you will need a properly sized ball for the coupler on the trailer you plan to tow. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258.
For trailer wiring, use # 118531. This is a T-One connector that plugs in line with the vehicle tail lights so it is easy to make the initial connections. It also requires a direct connection to the battery to power the trailer lights and protect the vehicles wiring harness. I have included a link to the wiring instructions as well.
expert reply by: Michael H

Have a question for the experts? click here.
Products Referenced in This Question
Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
2000 lbs GTW
Class I
Chrome
Product Specs:
1-9/16 Inch Shank Length
1-7/8 Inch Diameter Ball
3/4 Inch Diameter Shank
Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
3500 lbs GTW
Class II
Chrome
Product Specs:
1-9/16 Inch Shank Length
2 Inch Diameter Ball
3/4 Inch Diameter Shank
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Product Summary:
Custom Fit Hitch
Class I
Visible Cross Tube
200 lbs TW
2000 lbs GTW
Product Specs:
1-1/4 Inch Hitch
Product Page this Question was Asked From
Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4"
Product Summary:
Custom Fit Hitch
Class I
Visible Cross Tube
200 lbs TW
2000 lbs GTW
Product Specs:
1-1/4 Inch Hitch