Question:
I have ordered this controller and want to know if I will need additional parts to hook up to my 2012 tundra 4x4 crewmax . Please let me know if there will be any addition info needed.
asked by: Gus
Expert Reply:
If your 2012 Toyota Tundra came with a factory installed 7-Way trailer connector, no additional parts will be needed for the Prodigy RF, # 90250. If the truck came with a factory 4-Way, you will need to hardwire in a 7-Way using # 37185. You will also need about 25 feet of wire # 10-1-1, and a 40 amp circuit breaker, # PK54540.
You will need to attach the wire to the black wire, route it under the vehicle avoiding areas that may pinch or burn the wire, go up through the engine compartment and attach it to the AUX end of the circuit breaker you will need to attach to the metal of the engine bay. Then attach a length of wire from the BAT post to the positive battery terminal. The white wire on the connector will need to be grounded to the truck frame. The other wires are not required.
expert reply by: Michael H
Have a question for the experts? click here.
Products Referenced in This Question
Adapter 4 Pole to 7 Pole and 4 Pole
Product Summary:
Wiring Adapters
Single Function Adapter
Product Specs:
Plug and Lead
4 Flat
7 Blade
4 Flat
Product Page this Question was Asked From
Tekonsha Prodigy RF Wireless Trailer Brake Controller - 1 to 3 Axles - Proportional
Product Summary:
Proportional Controller
Electric
Digital Display
Trailer Mount
Product Specs:
Automatic Leveling
2 - 6 Brakes
10 Degrees
2010 Volvo XC90 Tow Wiring and Brake Controller InstallProdigy RF Hand Held Unit Does Not Power OnProblems Pairing the Hand-Held Remote with the Tekonsha Prodigy RF on a 2008 Chevy AvalancheDoes the Prodigy RF Brake Controller have to be Paired with the Same Vehicle For Each UseTips on Installing the Prodigy RF Trailer Brake Controller on a 2013 Hyundai Santa FeTrailer Wiring and Brake Controller Recommendations for a 1996 Buick Roadmaster Estate WagonInstallation of the Prodigy RF Brake Controller on a 2009 GMC SierraDoes the Tekonsha Prodigy RF Brake Controller Have to be Paired Again when Switching VehiclesPairing Problems with the Tekonsha Prodigy RF and a 2010 Porsche Cayenne SParts Needed to Install the Prodigy RF Brake Controller on a 2004 Porsche CayennePairing Problems with the Tekonsha Prodigy RF Brake Controller and a 2008 BMW X5Wiring Tow Vehicle to Work With Tekonsha Prodigy RF # 90250Is the Blue Wire Needed in the 7-Way RV Connector when Installing the Prodigy RF Brake ControllerElectric Trailer Brake Controller Recommendation for a 1999 Jeep WranglerProdigy RF Brake Controller # 90250 Installed on a 2006 Range Rover HSEPairing Problems with a Tekonsha RF Prodigy Brake Controller # 90250 and a 2008 Mercedes GL450Troubleshooting the Tekonsha Prodigy RF Trailer Brake Controller Not Pairing with Hand-Held UnitHow to get Power to the 7-Way on a 2004 Chevrolet Pickup for Installation of the Prodigy RFBrake Controller Recommendation for a 2008 Range Rover HSE Towing a Sooner Horse Trailer.How Does Prodigy RF Electronic Brake Controller # 90250 Know When To Send Power To Trailer BrakeCan Prodigy RF Brake Controller, # 90250, Be Installed On a 2006 Volvo XC70Prodigy RF Brake Controller Flashes NC and is Unable to Pair Hand Held Unit on a 2010 GMC SierraWiring a 2010 Tribeca for a Trailer Mount Brake Controller or a Prodigy Brake Controller
Instructions for 90250
