Question:
I have pr722 leafs and aps1 hanger kit the distance between spring holes is 25-1/4 the instructions say put hangers 25-5/8 wont this cause the shackles to be angled the wrong way ?
asked by: Wayne
Expert Reply:
The distance of 25-5/8 inches would be the correct distance to have between the spring hangers. You have to consider that as the the leaf spring compresses from the weight of the trailer it will flatten out and the overall length of the spring will increase so that the shackle will face the right direction.
expert reply by: Jameson C
Have a question for the experts? click here.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
Product Summary:
Suspension Kit
For Double Eye Springs
Single-Axle
Product Specs:
For 1-3/4 Inch Wide Spring
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles
Product Summary:
Leaf Springs
For Double Eye Springs
3 Leaf
25-1/4 Inch Long
Product Specs:
For 1-3/4 Inch Wide Spring
2500 lbs
Replacement Trailer Leaf Springs for a 1999 Thor Skamper Vision Pop-up Camper Model 23L
