Parts Needed to Install a Tekonsha Voyager Trailer Brake Controller on a 2006 Dodge Durango

Question:

what is needed for a voyager brake controller to be installed on a 2006 dodge durango

asked by: Tommy C

Expert Reply:

In order to install the Voyager brake controller, # 39510, on a 2006 Dodge Durango, you will need a few parts depending on how the vehicle is equipped. If the Durango came with a factory installed 7-Way trailer connector, all you will need is the brake controller and wiring harness # 3020-P.

This harness plugs into the brake controller on one end and into a a factory plug on the vehicle. The factory plug is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. I have included a link to a video that shows installation on a similar vehicle.

If the Durango did not come with a factory 7-Way trailer connector, you will first need to install a 4-Way, unless the vehicle already has one, using # 118390. I have included some instruction links for you. Next, you will install a 4 and 7 way installation kit # ETBC7. This will provide a 7-Way connector and the wiring for the brake controller.

I have included some links that explain the ETBC7 installation for you.

expert reply by: Michael H