Will it fit on my 2007 Chrysler Town and Country
asked by: Romy
The Yakima Big Horn bike rack you mention, part # Y02404 provides 11-1/8 inches of clearance between the hitch pin hole and the closest portion of the rack, which is the upright.
To determine if it will work on your Town and Country, you will need to measure rearward from your receiver hitch pin hole to the furthest rearward portion of the bumper, as shown in the photo I edited for you. If this distance is less than the 11-1/8 inch clearance provided by the rack, it will fit on your Town and Country.
We have found that the bumper clearance is typically around 3 to 5 inches, depending on whether your Town and Country is a stow-n-go model or not. The rack would most likely fit, but I would still recommend you measure it for yourself to confirm.
For womens bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # Y02531 is recommended. The adapter spans the distance between the seat post and the handle bar gooseneck, and provides a level attachment point to the bike rack so the bike has greater ground clearance and is not carried at an angle.
expert reply by: Mike L
Have a question for the experts? click here.
Products Referenced in This Question
Hitch Bike Racks
Trunk Bike Racks
Spare Tire Bike Racks
14-1/2 - 31-1/2 Inch
Bike Adapter Bar
Product Page this Question was Asked From
Locks Not Included
Fits 2 Inch Hitch
Frame Mount - Anti-Sway