Question:
Which way do the washers go on the top of the ball mount is the dish in to the hitch or out to the bolt ++ or +-+
asked by: Vince
Expert Reply:
If you are speaking of the conical washers used on the top bolt that holds the weight distribution head to the shank, as shown in the diagram I edited for you, the concave or dished portion of the washer will face inward toward the weight distribution head and away from the bolt head or nut, so that the washer will compress as its tightened.
expert reply by: Mike L
Have a question for the experts? click here.
Product Page this Question was Asked From
Pro Series Weight Distribution System w Friction Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW
Product Summary:
WD With Sway Control
Electric Brake Compatible
800 lbs
900 lbs
Bar-Style Friction
Round Bars
Product Specs:
Fits 2 Inch Hitch
Includes Shank
Up to 10000 lbs GTW
Recommendation for a Weight Distribution and a Brake Controller on a 2010 Toyota TundraUsing Pro Series Weight Distribution System, Part # PS49903, On a 16-Foot Livestock TrailerDetermining the Correct Weight Distribution System for a 2003 Expedition Towing a 6180 lb TrailerWeight Distribution for Different Trailer Weights and a 2005 Ford ExpeditionRecommended Weight Distribution System for 2003 Dodge Dakota Towing 5000lb Thor WandererWeight Distribution Sway Control for a 2005 Ford F-250 with Truck Camper in Bed and Boat TrailerWeight Distribution Hitch Recommendation for a 2001 Coleman Cheyenne Popup Camper TrailerWeight Distribution and Sway Control Recommendation for a Palomino SL21 TrailerWeight Distribution Recommendation for a 3500 lb 2002 Coleman UtahWeight Distribution and Sway Control for a 2012 Ford F-150 Supercrew and Jayco Jay FlightWeight Distribution Recommendation for a Ford Expedition and 21 Foot Toy HaulerWeight Distribution Recommendation for a Boat Trailer with 800 lbs Tongue Weight and Surge BrakesWeight Distribution Recommendation for a Trailer with Surge Brakes Towed by a 2004 TrailblazerWeight Distribution Recommendation for a 200 Ford F-150 and 8,000 Pound Travel TrailerWeight Distribution and Sway Control for a 2005 Dodge Ram 1500 and 6,800 Pound TrailerWeight Distribution and Sway Control for a Starcraft Centennial Trailer and 2007 Honda OdysseyReplacement Spring Release Clips Needed for the Pro Series Weight Distribution SystemMinimum Trailer Tongue Length to Install a Weight Distribution SystemWeight Distribution, Transmission Cooler and Brake Controller for 2006 Dodge Durango Choosing Weight Distribution System for 10,000 lb Capacity Deck Over Trailer Towed By Ford F150
Instructions for PS49903
