Question:
what is the outside diameter of the #bdo018006 and what is the space measurement between the geer teeth. I have an atwood 1980 model weld on jack that has an inside diameter of 11/2 inch and 1/4 inch between geer teeth. Cant find atwood replacement part but bulldog part look similar.
asked by: M F
Expert Reply:
I pulled the Bulldog Rack-and-Post Assembly, # BD018006, and found that the outer diameter of this jack measures slightly wider than 1-1/2 inches at 1.64, or 1-21/32, inches. The gear teeth spacing on this jack is .15, or 5/32, of an inch.
Most of the time jacks are not compatible between manufacturers.
expert reply by: John H
Product Page this Question was Asked From
Diameter of Bulldog Rack-and-Post Assembly w/ Steel Wheel # BD018006What is the Outer Diameter Of the Bulldog Rack-and-Gear Jack # BD161300Featured Help Information
