Question:
I have a 2010 GMC Yukon not XL SLE1. I do have the 7 pin trailer connector in the back. Do I need anything else to connect the Prodigy P3 to my truck? Love your site... Thanks!
asked by: Erin B
Expert Reply:
There are a couple of small items you may need when installing the P3 Brake controller on your 2010 GMC Yukon with factory trailer wiring package.
We have an informational article that details the installation and location of wires on your vehicle that you will need, see link.
The only parts that you might need are the M6-1.0 nut, # 185916, and M8-1.25 nut, # 185917, to secure the wires to the power studs at the front of the power distribution box if that step was not completed at the GM assembly plant. If those connections are already made you will not need the nuts.
expert reply by: Bob G
Have a question for the experts? click here.
Products Referenced in This Question
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
Product Summary:
Proportional Controller
Electric
Electric over Hydraulic
Digital Display
Vehicle Mount
Product Specs:
Automatic Leveling
2 - 8 Brakes
360 Degrees
Installing a Trailer Brake Controller in a 2001 Chevy Express Van with Factory Tow PackageTekonsha P3 Brake Controller, Part # 90195, Displays Message Output Shorted No BrakesTroubleshooting Malfunction on Tekonsha Prodigy P3 Brake Controller # 90195 on 2009 Ford F-150Comparing the Tekonsha P2 Brake Controller # 90885 to the P3 # 90195 for a 2013 Toyota TacomaFinding the Correct Brake Switch Wire to Install a Brake Controller on a 2000 Dodge Ram Van 3500Where to Mount a Trailer Brake Controller on a 2012 Dodge RamRecommended Weight Distribution System for 19 ft Airstream Travel TrailerEnsuring Best Braking Performance with Brake Controller on 2011 Ford F350Where to Mount a P3 Trailer Brake Controller on a 2001 Suzuki Grand VitaraTekonsha P3 Does Not Power On Installed on a 2000 Ford F-250 with Factory Tow PackageTracing Intermittent Short In Trailer Braking SystemInstallation of Tekonsha P-3 Trailer Brake Controller # 90195 on 2006 Ford ExpeditionHow to Connect the 12 Volt Power Lead to a 7-Way Connector on a 2004 Chevrolet SilveradoHow to Install Tekonsha P3 Electronic Brake Controller, Part # 90195, in 2001 Mitsubishi MonteroLocation of Brake Controller Connector in 2010 Toyota Land CruiserBrake Controller Installation on 2006 Toyota Tundra w/o Tow PackageWeak Trailer Brakes Using a Tekonsha P3 Trailer Brake Controller and 2010 Toyota TundraHow to Wire a Brake Controller on a 1993 Ford F-250 with a 6-Way ConnectorWill Tekonsha P3 Brake Controller # 90195 Fit and Work Well On 2004 Chevy Silverado 2500 HDWhere Does the Tekonsha P-3 Brake Controller Mount on a 2012 Toyota VenzaInstalling a Tekonsha P3 Electric Brake Controller on a 2008 Volkswagen TouaregTrailer Brakes Lock and Jerk at Low Speeds,Towed by 2008 Chevy Silverado w/Factory Brake Controller
Instructions for 90195
