Question:
I have just installed the sensor on my 2011 Toyota Venza. The top of the sensor is 36inch off the ground. No matter how I adjust the sensors, it will not see anything less than about 18inch tall no matter how close or far. Even tried adjusting one sensor upward and the other downward to no avail. Need suggestions Thanks
asked by: John S
Expert Reply:
What you could do is put something behind just the top of the unit between where it mounts and the back of it. This will produce a more downward angle and give you coverage closer to your 2011 Toyota Venza. You can also try turning the unit 180 degrees so the senors are on the bottom but that might cut the angle of visibility down for the sensors.
expert reply by: Michael H
Product Page this Question was Asked From
Will the Hopkins Backup Sensor System, # HM60100VA, Fit a 2003 Chevy TahoeRear Camera Recommendation for a 2010 Dodge Challenger with a Custom License Plate FrameWill the Hopkins Backup Sensor System # HM60100VA fit a 2012 Mini Cooper SIs Hopkins Backup Sensor System License Bracket Mount # HM60100VA Compatible on 2012 Hyundai SonataInstallation Difficulty for Hopkins Backup Sensor System, Part # HM60100VA, on Jeep Grand CherokeeWiring Recommendations for Installing a Hopkins Backup Sensor System on a Hyundia Genesis 4 doorCan the Frame Be Painted On Hopkins Backup Sensor System # HM60100VAUsing Hopkins Back-Up Sensor System on 2008 Acura MDXIs the Angle of the Hopkins Backup Sensor System AdjustableWill Hopkins Backup Sensor System Work on a Vehicle with Backup Camera Mounted on License PlateWill the Hopkins Backup Sensor System, # HM60100VA, Fit a 2004 Ford ExpeditionWill the Hopkins Backup Sensor System, # HM60100VA, Fit a 2005 Mercedes C 240 SedanTips for Installing Hopkins Backup Sensor System on a 2012 Nissan Altima CoupeCan Hopkins Backup Sensor System # HM60100VA Be Mounted in Front on Kia Optima and Run Off a SwitchAdjusting the Hopkins Backup Sensor System to View Closer to the Back of a 2011 Toyota VenzaHopkins Backup Sensor System Sounds Constant Alert when Installed on a 2008 Nissan PathfinderWill the Hopkins Backup Sensor System, # HM60100VA Fit a Chevy Silverado LTZCan the Hopkins Backup Sensor System Be Mounted Upside DownIs Drilling a Hole in the Trunk Required to Install the Hopkins Backup Sensor System, # HM60100VADoes Hopkins Backup Sensor System # HM60100VA Pick Up Distance to the Trailer Tongue or TrailerHow Would the Hopkins Backup Sensor Install on a Toyota Sienna 2012Installing Hopkins Backup Sensor System # HM60100VA on 2011 Toyota AvalonCould a Hopkins Backup Sensor be Installed on a 2004 GMC YukonAccessing Reverse Lights to Install Hopkins Backup Sensor # HM60100VA on 2007 Toyota Tundra TruckFeatured Help Information
