Question:
I measured the distance between the electrical plug for the ttrailer hitch and the spare tire release and is only about 13 inches. I am wondering if they are going to interfere with the mounting of the unit.
asked by: Jim D
Expert Reply:
I am not sure what would interfere with the Hopkins Backup Sensor system, # HM60100VA, considering that it mounts in the same place as the rear license plate. The overall width of the unit is 13-1/8 inches, see photo, and the height is 5-15/16 inches. It sounds like it will just fit if your measurement is slightly above 13 inches and not slightly less than 13 inches.
expert reply by: Michael H
Product Page this Question was Asked From
Can the Frame Be Painted On Hopkins Backup Sensor System # HM60100VAHopkins Backup Sensor System Sounds Constant Alert when Installed on a 2008 Nissan PathfinderCan the Hopkins Backup Sensor System Be Mounted Upside DownHow Would the Hopkins Backup Sensor Install on a Toyota Sienna 2012What are the Overall Dimensions of Hopkins Backup Sensor System, # HM60100VAFeatured Help Information
