Trailer Hitch, Wiring, and Engine Oil Cooler Recommendation for a 2006 Honda Accord V6

Question:

Greetings, I have a manual transmission V6 Honda Accord, 2006. I will be towing a motorcycle on a utility trailer, gross weight around 900 lbs, including the trailer. Would you recommend oil and transmission coolers? Are they needed? If so, what are the parts? Also, can you recommend a tow kit and the wiring kit I would need?

asked by: Ben K

Expert Reply:

For your 2006 Honda Accord, I recommend the Hidden Hitch trailer hitch, # 60953. This hitch comes with the proper ball mount, a hitch pin, and clip. You will need to add a ball, # 19256 for a 1-7/8 inch diameter, or # 19258 for a 2 inch diameter. Look on the trailer coupler to determine which size ball it requires.

For trailer wiring use # 118302. This is a simple T-One harness that plugs in line with the vehicle tail light wiring. I have included links to the installation details and installation videos for the hitch and wiring.

Normally, using a transmission cooler is a good idea. However, you stated that you have a manual transmission and a manual does not have any fluid in it. It is mechanical. So you will not need a transmission cooler.

Adding an engine oil cooler is still a good idea. Towing any amount of weight can put extra strain on the engine and cause heat build up. Excessive heat is the enemy of an engine. For an engine oil cooler, I recommend the Derale cooler, # D15505. Your engine uses the 20mmx1.5mm thread size included with this kit.

expert reply by: Michael H