Question Was Asked By - Rick

Will Brake Controller Harness 3035-P fit a 2007 Ford F-150 and is it Difficult to Install

Featured Help Information

Instructions for 90185-3035P

Installation Instructions

Instructions for 90185-3035P&alt=True

Trailer Brake Controller Installation - 2007 Ford Expedition - Video

Question:

We have a 2007 Ford F150 with factory 7-Way and we need to install at soon to be bought Prodigy brake control. I am planning on buying the 3035P harness from you also. My question is: does the F150 have the 6 pin connector under the dash to mate with the 3035P? Is this connector accessible without ping the bottom of the dash? I have to be able to talk my capable wife through the install, and I want to be sure she can handle it.

asked by: Rick

Expert Reply:

Part 3035-P will fit your 2007 Ford F-150,and as long as your truck is equipped with a factory 7-Way, all you will need is the 3035-P and the Prodigy. You should not have to remove any part of your dash to install this application, it should be underneath the dash near the center console.

The brake controller will needed to be mounted between flat and level or 70 degrees nose up. Once your wife has the controller mounted, all she needs to do is connect the harness between the controller and the port. I have added links to the instructions for both the controller and the harness. We sell the Prodigy and the harness together as a kit, part # 90185-3035P.

We also have a video of this controller being installed on 2007 Ford Expedition that should be a help to you and your wife.

expert reply by: Sarah

Have a question for the experts, click here.