Question:
Hi. Will this fit good for Subaru 09 legacy 2.5 limit?
asked by: Artem
Expert Reply:
The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36334, will fit your 2009 Subaru Legacy 2.5 Limited. I am including a link to the installation instructions on the hitch.
If you are going to do some towing, the recommended ball mount is Draw-Tite Ball Mount, part # 36071. For a hitch ball you can use Tow Ready 1-7/8 Inch Hitch Ball, part # 19256, or Tow Ready 2 Inch Hitch Ball, part # 19258.
For trailer wiring, use Tow Ready Wiring Harness, part # 119176KIT. I have included a link to the installation details for the wiring and a link to a video of the wiring kit being installed in a 2008 Volkswagen Eos. The vehicle is different, but the wiring installation is the same.
expert reply by: Jeff D

Have a question for the experts? click here.
Products Referenced in This Question
DISCONTINUED - Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit - Includes T
Product Summary:
Trailer Hitch Wiring
Powered Converter
Universal Fit
Product Specs:
4 Flat
Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
2000 lbs GTW
Class I
Chrome
Product Specs:
1-9/16 Inch Shank Length
1-7/8 Inch Diameter Ball
3/4 Inch Diameter Shank
Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
3500 lbs GTW
Class II
Chrome
Product Specs:
1-9/16 Inch Shank Length
2 Inch Diameter Ball
3/4 Inch Diameter Shank
Class II Drawbar 2-5/8" Rise or 3-1/4" Drop (Kit)
Product Summary:
Fixed Ball Mount
Standard Ball Mount
Standard
Steel
Product Specs:
Fits 1-1/4 Inch Hitch
Rise - 2-5/8 Inch
Drop - 3-1/4 Inch
Class II
3500 lbs GTW
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Product Summary:
Custom Fit Hitch
Class II
Visible Cross Tube
300 lbs TW
3500 lbs GTW
Product Specs:
1-1/4 Inch Hitch