Part # A60110, Can you send me the dimensions for this? Thanks
asked by: Dave
I went out to the warehouse and pulled the Agri-Cover Hitch, 3 A60110 and took some measurements. I made a couple of pictures showing the dimensions I took.
The mounting hole pattern is as follows:
The two outside holes are 8-1/4 inches apart on center. The inner set of holes are 5 inches apart on center. And the distance between 2 holes on one side is 1-5/8 inches.
The distance from the front of the mounting plate to the face of the receiver is 5-3/8 inches. The overall height is 6-5/8 inches. From the front of the receiver to the back of the receiver is 5 inches. And from the front or back of the receiver to the center of the hitch pin hole is 2-1/2 inches.
expert reply by: Michael H
Have a question for the experts? click here.
Product Page this Question was Asked From
2 Inch Hitch
Featured Help Information