Question:
do you know which of these exhaust tips will fit a 2009 Chev Taho SUV. The stock pipe is fairly short and slants down. Looking for a bolt-on Stainless Steel Tip
asked by: Tim
Expert Reply:
You will need to measure the overall diameter of the tailpipe on your 2009 Chevrolet Tahoe to select the correct tip. It would also help to measure the distance out that the exhaust tip would need to extend, so you could select a tip that is not too long or too short.
I have provided a link to all of the clamp on exhaust tips we carry. Once you have the measurements for your Tahoe, you can click on the link, then on the right side of the page you can select the inlet size and length of tip that you need, then all of the tips matching those dimensions will be displayed.
As an example, lets say you have a 2-1/4 inch diameter tail pipe and you need a 12 inch length tip. The correct tip would be the MagnaFlow 3 inch exhaust tip for 2-1/4 inch - 2-1/2 inch tailpipes, # MF35208.
The tip you selected, # MF35124, is a weld on tip for 2-1/4 inch diameter tail pipes.
expert reply by: Bob G
Products Referenced in This Question
MagnaFlow 3" Exhaust Tip - Stainless, Clamp-On for 2-1/4" - 2-1/2" Tailpipe
Product Summary:
Round
One Tip
Rolled Edge
Clamp On
3 Inch Diameter
Product Specs:
12 Inch Length
Angle Cut
2-1/4 Inch Tailpipe Fit
2-1/2 Inch Tailpipe Fit
Product Page this Question was Asked From
MagnaFlow 4" Exhaust Tip - Stainless, Weld-On for 2-1/4" Tailpipe
Product Summary:
Round
One Tip
Weld On
4 Inch Diameter
Product Specs:
4-1/2 Inch Length
Straight Cut
2-1/4 Inch Tailpipe Fit
