Question:
I want to know if there is an adapter for my pro series trunnion bar weight distributing hitch pn:49586 so i can use a dual cam sway system?
asked by: Larry
Expert Reply:
In order to be able to use a dual cam sway control like a Reese Dual Cam High-Performance Sway Control # RP26002 you will need to have spring bars that are bent at the end of them. Check out the picture I attached that shows which bars will work and which will not.
For a curved bar that is in the same weight range as your Pro Series Trunnion Style Weight Distribution Kit # 49586 you would want a Replacement Trunnion Spring Bar # RP22225. This will allow you to use a Dual Cam Sway Control # RP26002.
I also attached an FAQ article on weight distributions systems that has a section on sway control systems for you to check out.
expert reply by: Jameson C
Products Referenced in This Question
Replacement Trunnion Spring Bar for Reese Weight Distribution System - 800 lbs TW
Product Summary:
Weight Distribution
Replacement Parts
800 lbs TW
Product Specs:
Spring Bars
Trunnion Bar
Product Page this Question was Asked From
Reese Dual Cam High-Performance Sway Control
Product Summary:
Sway Control Only
Electric Brake Compatible
Dual Cam
Product Specs:
Shank Not Included
Problem Adjusting Dual-Cam Sway Control on a Weight Distribution SystemChoosing Weight Distribution and Sway Control for a 1992 Salem Trailer and 2003 Toyota HighlanderTroubleshooting Sway on a 2008 Ford F350 Towing a Trailer with Weight Distribution SystemCan Reese Dual-Cam Sway Control be Used Without a Weight Distribution SystemFront of Truck Sways Once Reese Strait-Line Weight Distribution System is InstalledWhy are Some Reese Dual-Cam Sway Controls Gold and Some are SilverWeight Distribution System Recommendation for 2008 Dodge Ram 1500 Towing a Aerolite Travel TrailerCan Dual-Cam Sway Control be Added to a Draw-Tite Round Bar Weight Distribution SystemSway Control Recommendation for a Jayco Discovery Pop Up Camper TrailerSway Control and Suspension Enhancement Recommendations for a 2013 Subaru OutbackSway Control Recommendation for a 7,500 Pound Premier Travel Trailer and Dodge Ram 1500Weight Distribution Recommendation and Towing Capacity of a 2009 GMC AcadiaWhere Should a Load be Placed on a Tandem Axle Trailer Towed by a 2006 Freightliner M2 Box TruckSway Control Recommendation for a 2003 Toyota Tundra and Cargo Trailer with Varying LoadsAdjusting a Weight Distribution and Sway Control System to Tow a Trailer with a New TruckIs Sway Control Needed for Hauling Motorcycle on 6X12 Patriot Homesteader Enclosed TrailerWhat is the Difference Between the Draw-Tite and Reese Versions of Dual Cam Sway ControlReese Dual-Cam Sway Control Mounting Brackets are Loose On the Trailer FrameWhat Size Hole is Needed for Installation of the Self Tapping Bolts In the Reese Dual Cam SystemCan a Weight Distribution System be Used on 1998 Toyota 4RunnerWhich Style Spring Bars are Compatible with Dual Cam Sway Control SystemsDifferences Between Friction Based Sway Control and Dual Cam System For a Trail-Bay Travel TrailerTips on Reducing Trailer Sway When Dual-Cam Sway Control is Not EnoughWill A Weight Distribution Stop Sway on a Trailer With the Weight Loaded at the Rear of the TrailerFeatured Help Information
Instructions for RP26002
Common Weight Distribution and Sway Control Questions
