Question:
Does the bumper cover need to be modified or cut to install this hitch on a 2003 Mercedes ML350? Please provide a copy of the installation instructions.
asked by: Kenneth S
Expert Reply:
To install this Draw-Tite Trailer Hitch Receiver # 36258, you will need to either have the rear fascia door removed or have it trimmed before it can be reinstalled on your 2003 Mercedes ML350. I attached installation instructions for this product for you to check out also.
You may be interested in the following products to complete your towing setup:
Class II Drawbar # 36071
Hitch Ball with 2 inch Diameter and Short Shank # 19258
Hitch Ball with 1-7/8 inch Diameter and Short Shank # 19256
Pin and Clip # PC3
Tow Ready Wiring # 119176KIT (installation instructions and installation video attached)
expert reply by: Jameson C
Have a question for the experts? click here.
Products Referenced in This Question
DISCONTINUED - Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit - Includes T
Product Summary:
Trailer Hitch Wiring
Powered Converter
Universal Fit
Product Specs:
4 Flat
Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
2000 lbs GTW
Class I
Chrome
Product Specs:
1-9/16 Inch Shank Length
1-7/8 Inch Diameter Ball
3/4 Inch Diameter Shank
Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
3500 lbs GTW
Class II
Chrome
Product Specs:
1-9/16 Inch Shank Length
2 Inch Diameter Ball
3/4 Inch Diameter Shank
Class II Drawbar 2-5/8" Rise or 3-1/4" Drop (Kit)
Product Summary:
Fixed Ball Mount
Standard Ball Mount
Standard
Steel
Product Specs:
Fits 1-1/4 Inch Hitch
Rise - 2-5/8 Inch
Drop - 3-1/4 Inch
Class II
3500 lbs GTW
Pin and Clip For Class III, IV and V Trailer Hitch Receiver
Product Summary:
Pins and Clips
Hitch Pin
Product Specs:
Fits 2 Inch Hitch
Fits 2-1/2 Inch Hitch
5/8 Inch Diameter
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Product Summary:
Custom Fit Hitch
Class II
No Cross Tube
300 lbs TW
3500 lbs GTW
Product Specs:
1-1/4 Inch Hitch
Does the Bumper have to be Removed from a 1999 Mercedes ML320 to Install Draw-Tite Trailer HitchIs Drilling Required for Installation of Hitch on 2004 Mercedes ML 350
Instructions for 119176KIT
Helpful Video - Video
