I have a 2011 Toyota FJ Cruiser that I need to convert a factory 4 pin to accommodate a 7 pin and a 4 pin. Im unsure how to wire it up?
asked by: Eric J
What you will need is the 4 and 7 Way Installation Kit, # ETBC7. This kit comes with everything you will need to add a 7-Way and 4-Way trailer connector to your 2011 Toyota FJ Cruiser. It also provides some parts for a brake controller. If you have a trailer that requires a 7-Way connector, it probably has electric brakes and you may want to consider a brake controller.
I have included a link to an FAQ article and a link to a video that explains the installation of an ETBC7 kit. You may also need a circuit tester like # 3808 if you do not already have one.
For a brake controller, I recommend the Tekonsha P2, # 90885. This is one of our best sellers because it is easy to set up and use. I have included a link to the installation details for you to view along with a link to an FAQ on brake controllers.
expert reply by: Michael H
Products Referenced in This Question
Tools for Wiring
Electric over Hydraulic
2 - 8 Brakes
2 - 8 Brakes
10 Gauge Wire
Brake Controller Wiring
Wired to Brake Controller
Product Page this Question was Asked From
Single Function Adapter
Plug and Lead