I NEED TO KNOW WHAT I WILL NEED TO FLAT TOW A 1992 CELICA G.T.. CONVERTIBLE BEHIND MY 98 PACEARROW MOTOR HOME
asked by: WILLIAM C
The first thing you will need is a base plate kit to provide you with the attachment point on your 1992 Toyota Celica GT for a set of tow bars. For base plates I would recommend a Roadmaster Classic Base Plate Kit # 1125-1.
For a tow bar I would recommend a RoadMaster Sterling All Terrain Tow Bar # RM-576. This comes with safety cables, wiring, and quick disconnects like the RM-201 that you referenced. I attached installation instructions for you to check out also.
Next, you will need a wiring solution. If you plan on only towing occasionally then I would recommend you get a Magnetic Towing Light Kit # C-ATL20A. If you are looking for a more permanent solution I would recommend a Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. I attached an FAQ on picking out a wiring solution as well as installation instructions for installing a diode kit.
Most states require a supplemental braking system in the towed vehicle to help take some of the braking load off of the tow vehicle. For that I would recommend a Roadmaster Even Brake Portable Proportional Braking System # RM-9400. I attached an article on supplemental braking also.
I also attached an FAQ article that covers all of the basics of flat-towing for you to check out.
expert reply by: Jameson C
Have a question for the experts? click here.
Products Referenced in This Question
Fixed Draw Bars
Bypasses Vehicle Wiring
Removable Tail Light Kit
Splices into Vehicle Wiring
Tail Light Mount
Hitch Mount Style
Stores on RV
Product Page this Question was Asked From
Car Side and Tow Bar Side