Question:
Given a Kenda 4.80/4.00-8 Trailer Tire on an 8 5 on 4-1/2 wheel AM30020 with a 34822545BX hub on a R104BT8-38 spindle, what is the distance from the inside sidewall of the tire to the inside end of the spindle?
asked by: Mark D
Expert Reply:
I went out to the warehouse and pulled all of the parts:
Kenda 4.80/4.00-8 Bias Trailer Tire and Wheel, # AM30020.
Trailer Hub, # 34822545BX
And Spindle, # R104BT8-38
I assembled all of the parts and measured from the inside side wall of the tire to the end of the spindle. It measured 4-3/16 inches.
expert reply by: Michael H
Have a question for the experts? click here.
Products Referenced in This Question
Trailer Hub Assembly for 8" to 10" Wheels - 2,000-lb Axles - 5 on 4-1/2 - L44643 Bearings
Product Summary:
Hub
Standard
8 Inch
10 Inch
L44643
L44643
Product Specs:
For 2000 lbs Axles
5 on 4-1/2 Inch
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
Product Summary:
Tire with Wheel
Bias Ply Tire
Steel
4.80/4.00-8
Product Specs:
Load Range B
8 Inch
5 on 4-1/2 Inch
Product Page this Question was Asked From
Product Summary:
Standard Spindle
4 Inch Long
Product Specs:
Round
1-1/4 Inch Diameter
For 2000 lb Axle
What Is Overall Length and Measurements of Spindle # R104BT8Distance From Side wall to Spindle End with Tire/Wheel # AM30020, Hub # 3482254BX, Spindle BT8Which 5 Bolt Hub Assembly is Recommended for Use with the Redline Spindle # R104BT8Assembly Order for Bearings, Races, and Seals for Trailer Hub # 34822BXTrailer Hub Spindle Recommendation for use with a # 34822UC1 Trailer HubHow to Remove a Hub from a Ram Line Jet Boat Trailer with Damaged Bearings.Featured Help Information
