customer service | view cart
Question Was Asked By - Syd
Question:
How do I check the wire positions in the harness connecting my 95 Ford Explorer to my 01 Viking 2170 pop-up? I just had a 7-blade connector installed on the Ford to match the harness I already had previously used on a 97 Grand Caravan. Now all the camper signal lights seem to work, just not in sync with the Ford - R. blinker makes all flashers go headlights turns R. running light on, L. light off, etc. Is there a schematic for this connection? Any help is appreciated.
asked by: Syd
Expert Reply:
We have a web page that contains a diagram showing the way a typical 7 way connector is wired (keep in mind, the view is from the rear of the connector.) Your wire colors might not be the same as in the diagram, but you can use a circuit tester to ensure each side of the connector is wired the same way. You will probably find that you'll need to swap a few of the wiring connections around so they match up correctly.
expert reply by: Mike
Product Page this Question was Asked From
Have a question for the experts, click here.
Questions about part number 40376
Finding the Stop Light Switch on a 1995 Chevy PickupRelated Questions
What is the Length of the Bulldog Plunger Pin Assembly, # BD500103