Question:
this vehicle has the factory installed 7 way but i dont see a plug under the dash like it is explaned in you product installations am i missing something or do i need a adapter
asked by: Jeff G
Expert Reply:
The factory brake controller port on your 2000 Ford F-250/F-350 Super Duty will be located under the dash near the center console on most vehicles.
First, connect the Draw-Tite Brake Control Adapter, part # 3035-p, to the Draw-Tite Activator I Brake Controller, part # 5100. Then, plug the adapter which is now connected to the brake controller into the factory brake controller port under the dash. Mount the brake controller to a place on the dash that is easily accessible.
I am including a link to a FAQ page that will explain brake controller installation on the 1997-2004 Ford trucks.
expert reply by: Jeff D
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
Product Summary:
Brake Controller
Accessories
Product Specs:
Wiring
Brake Controller Wiring
Plugs into Brake Controller
Draw-Tite Activator Trailer Brake Controller - 1 to 2 Axles - Time Delayed
Product Summary:
Time Delayed Controller
Electric
Indicator Light
Vehicle Mount
Product Specs:
Automatic Leveling
2 - 4 Brakes
360 Degrees
Product Page this Question was Asked From
Draw-Tite Activator Trailer Brake Controller - 1 to 2 Axles - Time Delayed
Product Summary:
Time Delayed Controller
Electric
Indicator Light
Vehicle Mount
Product Specs:
Automatic Leveling
2 - 4 Brakes
360 Degrees
Hard Wiring Draw-Tite Activator Trailer Brake Controller, Part # 5100, in 2004 Ford F-250/F-350Wiring the Draw-Tite Activator Trailer Brake Controller to the Factory Harness on a 2004 Ford F-250Parts Needed to Add a 7-Way Trailer Connector to a 2002 Ford F-250Should there be Power on a Brake Controller Blue Wire with the Brake Pedal and No Trailer AttachedWire Diagram for Installing a Voyager Brake Controller on a 2002 Ford F-250Reese Brakeman 83501 Only Sends Power to Trailer Brakes When Using Manual Over RideInstallation of Brake Controller on a 1996 GMC with Brake Lead Hot All The Time At The TrailerWhen Head Lights are On the Trailer Brakes Activate on 2001 Chevy Silverado and Voyage Brake ControlTrailer Brakes Lock Up with Miswired Brake Controller and Trailer ConnectorTroubleshooting Draw-Tite Brake Controller # 5100How Long is the Wiring Harness for a Brake Controller on a 2005 Chevy TahoeNo Power to Trailer Brakes When Stepping on the Brake Pedal on a 2004 Dodge DakotaReliance Trailer Brake Controller Shows No Trailer Attached with a Trailer AttachedRed Light Stays On All the Time with Draw-Tite Act I Brake Controller withTrailer ConnectedHopkins Reliance Trailer Brake Controller Does Not Work When Brake Pedal is PressedTrailer Brake Controller Brake Controller Manual Override Switch Is Not WorkingDraw-Tite Activator Brake Controller Shows an Overload OL Condition When Trailer is ConnectedOnly the Left Side Trailer Brake Locks Up using a Time Delay Brake ControllerWhat Parts are Needed to Install a Draw-Tite Trailer Brake Controller on a 2007 Toyota TacomaRecommend Brake Controller For 2003 Subaru OutbackBrake Controller Installation Trouble When Installing on a 1997 GMC Sierra Ext. CabParts Needed to Install an Electric Trailer Brake Controller on a 2007 Nissan Titan or FrontierTroubleshooting Reliance Brake Controller Not Activating Trailer Brakes on 2009 Nissan Titan
Instructions for 3035-P
Brake Controller Installation on a Full-Size Ford Truck or SUV
