Bearing Set Needed for a Dexter Torflex Axle with 4 Bolt Pattern Hub on a 1995 Dutchman Trailer

Question:

This is on a 1995 Dutchmen fold down camping trailer. I need to replace the bearings on a Dexter torflex axle and Dexter hubs, 4 bolt pattern. Hub number: A 19-8. I cant make out the axle number and the bearing numbers are worn off. Thanks for taking my question.

asked by: Jon O

Expert Reply:

From the information I have, you have selected the correct bearing kit, # BK1-150, for your Dexter Torflex axle. All of the 4 bolt pattern Torflex axles use the # R104BTREZ, EZ lube spindles. To be sure you can measure the spindle.

Your spindle should measure 1.06 inches diameter at both the inner and outer bearing surface and 1.50 inches at the seal bearing surface. If this is the case the BK1-150 bearing kit is the correct kit for your axle and hub.

I have linked a video that shows how to measure a spindle for your trailer.

expert reply by: Bob G