Question:
I am concerned about the length of an adjustable ball mount.ie too long Is there a maximum allowed distance from the center of the hitch pin to the center of the ball hole for my 2007 VOLVO XC90 ?
asked by: Tom
Expert Reply:
It looks like all of the available hitches for your 2007 Volvo XC90 are class III hitches with a 2 inch receiver. This is a good thing, because the class III hitch can handle more tongue weight and stress than lower class hitches. What this means is that having a longer ball mount will be fine.
On the standard ball mount that is recommended for your vehicle, # 2923, the distance from the center of the hitch pin hole to the center of the ball hole is 8-1/2 inches. Since the Curt Multi-Ball Adjustable Ball Mount, # D900, is so much longer at 16 inches, if you are concerned, I do have another option.
Take a look at the Hidden Hitch Adjustable Ball Mount, # 80414. This mount is 14 inches from the center of the hitch pin hole to the center of the ball hole. If that is still too long, then # 80412 is 12 inches from pin hole to ball hole. Add to either of those the Tow Ready Interchangeable Hitch Ball Set, # 63803, and you have a complete set up at a more economical price point.
expert reply by: Michael H

Have a question for the experts? click here.
Products Referenced in This Question
Ball Mount 3/4" Rise or 2" Drop, 7,500 lbs
Product Summary:
Fixed Ball Mount
Standard Ball Mount
Hollow Shank
Standard
Steel
Product Specs:
Fits 2 Inch Hitch
Rise - 3/4 Inch
Drop - 2 Inch
Class III
7500 lbs GTW
Tow Ready Interchangeable Hitch Ball Set with 1-7/8", 2" and 2-5/16" Hitch Balls
Product Summary:
Hitch Ball
Interchangeable Ball Set
8000 lbs GTW
Class III
Chrome
Product Specs:
1-7/8 Inch Diameter Ball
2 Inch Diameter Ball
2-5/16 Inch Diameter Ball
1 Inch Diameter Shank
Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 6,000 lbs
Product Summary:
Adjustable Ball Mount
Single Ball Mount
Hollow Shank
Extra Long
Steel
Product Specs:
Fits 2 Inch Hitch
Rise - 8-3/8 Inch
Drop - 9-5/8 Inch
Class III
6000 lbs GTW
Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 14" Long
Product Summary:
Adjustable Ball Mount
Single Ball Mount
Hollow Shank
Standard
Steel
Product Specs:
Fits 2 Inch Hitch
Rise - 8-3/8 Inch
Drop - 9-5/8 Inch
Class III
6000 lbs GTW
Product Page this Question was Asked From
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Product Summary:
Multi-Ball Mount
Adjustable Ball Mount
Three Ball Mount
Solid Shank
Super Extra Long
Steel
Product Specs:
Fits 2 Inch Hitch
10000 lbs GTW
Will the CURT # D900 Multi-Ball Adjustable Ball Mount Work on a 2005 Jeep Liberty at Maximum Rise
Is Trailer Hitch Tongue Weight Capacity Significantly Reduced when Using An Adjustable Ball MountFeatured Help Information

Hidden Hitch Adjustable Ball Mount Review - Video