Question Was Asked By - James

How to Install the MaxxAir Trailer Roof Vent Cover and Ease of Installation

Question:

you say no holes to drill to mount maxxair vent covers then how are they mounted & how hard

asked by: James

Expert Reply:

There are three slotted holes on each corner of the, item # 64643, MaxxAir White Trailer Roof Vent Cover. There should be some holes present on your existing vent which you can utilize with the slotted holes on the cover to complete the installation. The presence of the slotted holes in several locations usually allows customers to install the cover without having to drill any new holes on their trailer.

The MaxxAir White Trailer Roof Vent Cover, item # 64643, uses a bracket that will screw into the side of the existing vent, and then the MaxxAir cover mounts to that bracket. They are designed to mount over an existing vent. It fits over a vent that has a crank handle, with the back shorter side on the hinging side of the vent. This way, the vent will block rain from entering the vent when driving while the vent is open. The presence of the slotted holes in several locations usually allows customers to install the cover without having to drill any new holes on their trailer. Installation is quite easy, safely accessing the roof of your trailer may be the hardest part.

expert reply by: Andi

Have a question for the experts, click here.