Question:
I am having trouble finding a hitch for my 1986 k30 chevrolet. Crew Cab 4x4. It says this will fit my application but must have 19 inches from end of frame rail to spring shackle. I am not exactly sure what they are referring to. Doesnt the hitch go around the rear shackle? Isnt that why there is the one single bolt hole in the front. I dont have anywhere near 19 inches from what I am calling the spring shackle. Thanks for your help.
asked by: Mark A
Expert Reply:
On the Draw-Tite Trailer Hitch, # 41938, the 8 bolts used to attach the hitch each go into the frame rails on the truck. When I spoke with my contact at Draw-Tite he gave a much more clear description of what you will need for this hitch to mount to your truck. Basically, the hitch is 19 inches long. If you measure from the end of the frame rails at the rear of the truck towards the front, you will need at least 19 inches with nothing in the way in order for the hitch to fit.
I have included a link to the installation instructions for reference. The recommended ball mount is # 40331 and you can use pin and clip # PC3 and ball # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, you would need T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118312. I have included a link to the installation details and a link to a video showing a typical installation.
expert reply by: Michael H
Have a question for the experts? click here.
Products Referenced in This Question
Hitch Ball with 2-5/16" Diameter and Medium Shank, 12,000 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
12000 lbs GTW
Class IV
Chrome
Product Specs:
2-3/4 Inch Shank Length
2-5/16 Inch Diameter Ball
1-1/4 Inch Diameter Shank
Forged Ball Mount 3" Rise or 4" Drop, 16,000 lbs
Product Summary:
Fixed Ball Mount
Standard Ball Mount
Solid Shank
Long
Forged Steel
Product Specs:
Fits 2 Inch Hitch
Rise - 3 Inch
Drop - 4 Inch
Class IV
16000 lbs GTW
Hitch Ball with 2" Diameter and Medium Shank, 10,000 lbs GTW - Chrome
Product Summary:
Hitch Ball
Standard Ball
10000 lbs GTW
Class IV
Chrome
Product Specs:
2-5/8 Inch Shank Length
2 Inch Diameter Ball
1-1/4 Inch Diameter Shank
Pin and Clip For Class III, IV and V Trailer Hitch Receiver
Product Summary:
Pins and Clips
Hitch Pin
Product Specs:
Fits 2 Inch Hitch
Fits 2-1/2 Inch Hitch
5/8 Inch Diameter
Product Page this Question was Asked From
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Product Summary:
Custom Fit Hitch
Class IV
Concealed Cross Tube
1200 lbs TW
12000 lbs GTW
Product Specs:
2 Inch Hitch
15000 lbs WD GTW
1500 lbs WD TW
Interference with Spare Tire When Installing Draw-Tite Class V Receiver on 1974 Chevy Pick Up
Instructions for 118312
Trailer Wiring Harness Installation - 1993 Chevrolet S-10 Pickup - Video
