Will the Reese 30051 5th wheel hitch fit a 2010 Ford F350 SuperDuty moving from one truck to another? And if so, what do you recommend as the proper rails/installation kit for this truck. Thanks...
asked by: Tom B
Yes, you will be able to mount a Reese 5th Wheel Trailer Hitch with Square Tube Slider - 16,000 lbs, part # RP30051, in a 2010 Ford F-350 Super Duty.
You will need a Reese Fifth Wheel Installation Kit for the 2010 Ford F-250 and F-350 Super Duty, part # RP50082-58, for all the necessary hardware to make the switch. You could also use a universal rail kit such as the Reese Fifth Wheel Installation Kit for the 2010 Ford F-250 and F-350 Super Duty, part # RP30035 to install this hitch. However, it usually takes around twice as long to install a universal kit compared to a custom fit kit due to the additional drilling and brackets that were not specifically designed for that vehicle.
If you are switching this 5th wheel hitch into a truck that does not have wiring in the bed, you may also need Pollak Wiring for the 2010 Ford F-250 and F-350 Super Duty, part # PK11893-11932, to complete your towing setup.
I have attached directions in the link below for the custom rail kit below.
expert reply by: Jameson C
Have a question for the experts? click here.
Products Referenced in This Question
Fifth Wheel and Gooseneck Wiring
Above the Bed
Product Page this Question was Asked From
Sliding Fifth Wheel
10 Inch Fore/Aft Travel
4000 lbs TW
16000 lbs GTW
Standard - Double Jaw
15 - 18 Inch Tall
Featured Help InformationInstructions for RP50082-58