Since F measures 6.00 what does B, C, and the space between B and C measure in length? F 6.00 length B ? length C ? length blank space between C and D ? length D ? length
asked by: Jackie F
For the Spindle 2.25 inch RD x 6 inch STUB, item # R50642, the width of the B or seal surface area of the spindle is .550 inches, and the width of the C or inner bearing surface of the spindle is 1.00 inches. The width of D or the outer bearing surface is 1.075 inches and the distance between the inner and outer bearing surfaces is 1.350 inches. The width of the threaded portion is .780 inches and the overall length of the spindle is 10-7/8 inches.
These dimensions are usually not needed. To determine the correct bearings seals and hub for use with this spindle the bearing and seal dimensions are used and a kit can be determined from these measurements. The bolt pattern for the trailer wheel that will be used and the weight capacity of the axle will also be needed for selection of the correct hub. The # R50642 spindle uses the # BK3-300 Bearing and Seal Kit. If you need a 5 on 4-1/2 inch bolt pattern then the trailer hub assembly would be the # 84545BX for 3500 lb axles.
expert reply by: Bob G
Have a question for the experts? click here.
Products Referenced in This Question
For 3500 lbs Axles
5 on 4-1/2 Inch
5200 lbs Axle
6000 lbs Axle
7000 lbs Axle
Product Page this Question was Asked From
6 Inch Long
2-1/4 Inch Diameter
For 5000 lb Axle
Featured Help Information