Question:
I have a 1996 GMC Suburban that has a Tekonsha Commander installed. I wish to upgrade to the P-3 controller. Is there an adapter or cable I can use, or should I just install from scratch using the supplied cable?
asked by: Tom
Expert Reply:
As your 1996 Suburban already has the wiring in place and you are just wanting to swap one controller for another, you can simply use the harness included with the P-3. The wiring should match up color for color, but I would recommend using a circuit tester like part # 40376 to confirm your connections before making them.
expert reply by: Mike L
Have a question for the experts? click here.
Products Referenced in This Question
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
Product Summary:
Proportional Controller
Electric
Electric over Hydraulic
Digital Display
Vehicle Mount
Product Specs:
Automatic Leveling
2 - 8 Brakes
360 Degrees
Tekonsha P3 Brake Controller, Part # 90195, Displays Message Output Shorted No BrakesTroubleshooting Malfunction on Tekonsha Prodigy P3 Brake Controller # 90195 on 2009 Ford F-150Comparing the Tekonsha P2 Brake Controller # 90885 to the P3 # 90195 for a 2013 Toyota TacomaEnsuring Best Braking Performance with Brake Controller on 2011 Ford F350Tekonsha P3 Does Not Power On Installed on a 2000 Ford F-250 with Factory Tow PackageTracing Intermittent Short In Trailer Braking SystemParts Needed to Install a Trailer Brake Controller on a 2000 Isuzu Trooper with 4-Way ConnectorWeak Trailer Brakes Using a Tekonsha P3 Trailer Brake Controller and 2010 Toyota TundraTrailer Brake Controller Shows 3.5 Volts Output with No Trailer ConnectedParts Needed to Install a Trailer Brake Controller on a 2006 Toyota Tundra with 4-Way ConnectorParts Needed to Install a Prodigy P3 Brake Controller on a 2010 GMC YukonTroubleshooting Loss of Power to a Brake Controller on a 2011 Toyota TundraTekonsha P3 Brake Controller Recommendation for a 2008 Toyota FJ Cruiser Forest River TrailerCan an Electric Trailer Brake Controller be Used on a 1999 Mack Truck CH600 with Air BrakesHopkins Impulse Trailer Brake Controller Draws Too Much Power and Drains Battery on 2004 Dodge RamTrailer Hitch and Wiring Recommendation for a 2004 Freightliner SprinterDodge Factory Brake Controller Does Not Work with Electric Over Hydraulic Brakes on Horse TrailerBrake Controller Wiring Harness Needed for Installation of a Brake Controller on a 2008 Ford TruckGooseneck Trailer Brakes are Locking Up When Blinker is Turned On, 2005 Dodge Ram 2500Troubleshooting Electric Over Hydraulic Trailer Brakes Jerking When Brakes are Quickly AppliedBrake Controller Installation Parts Needed for A 1997 GMC Yukon with a Prodigy P3 Brake ControllerTrouble Shooting Problems with GM OEM Integrated Brake Controller Performance on a 2008 Chevy 2500Parts Needed to Install Tekonsha P3 Trailer Brake Controller, 2003 Dodge Ram Factory Tow Package
Instructions for 90195
