Brake Controller Adapter Wiring Instructions for a 2002 F-250 With Factory Tow Package

Question:

I purchased a different vehicle and would like to transfer my brake controller into this vehicle. I have had the agility in a chevy truck previously. I am now wanting to install it into a 2002 F-250 super duty. I no longer have the wiring instructions and need to know which color wires I need to connect to each other. I have the factory connection for the F-250. It has red, white, blue, green, and brown wires. My agility controller has red, white, blue, and black wires. Could you please help me with the connection instructions? I would greatly appreciate it.

asked by: Kevin G

Expert Reply:

Yes, I can help you connect your Hopkins Agility Brake Controller, item # HM47294, to your Ford factory brake controller wiring adapter.

The red wire from the Ford adapter should go to the black wire from the brake controller, the white wire should match to the white wire, the blue wire should match to the blue wire and the light green wire from the adapter should go to the red wire from the brake controller.

This will get your brake controller setup and ready to attach to the port under the dash on your new 2002 F-250 Super Duty.

If you would like a plug and play wiring harness that will work with the Agility brake controller, item # HM47294, the Hopkins Plug-in Simple Brake Wiring Adapter - Ford, item # HM47715, will work for your vehicle.

expert reply by: Bob G