Question:
I noticed on the rear spring hanger, the one with the bushing, the hole is off center. Which way should the offset hole be facing, forward or aft? What is the offset of the AM20305 Star Aluminum wheel?
asked by: Craig W
Expert Reply:
On the Redline Rear Hanger, part # 30-20, the hanger has top stamped into one of the sides of the hanger. The hanger is welded to the trailer with the side marked top, facing the outside of the trailer with the word top showing.
I am including a picture of the hangar that shows the top marking and how it is positioned on the trailer.
The Dexstar Aluminum Star Mag Trailer Wheel, # AM20305, has a zero offset. This will mean the hub mounting surface of the wheel is at the centerline of the wheel.
expert reply by: Jeff D
Have a question for the experts? click here.
Products Referenced in This Question
Americana Aluminum Star Mag Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2
Product Summary:
Wheel Only
Aluminum
5-1/2 Inch Wide
Product Specs:
14 Inch
5 on 4-1/2 Inch
Product Page this Question was Asked From
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
Product Summary:
Hangers
For Double Eye Springs
Single-Axle
Product Specs:
9/16 Inch Diameter
For 1-3/4 Inch Wide Spring
Featured Help Information
