Question:
Interested in installing the Master Lock wireless camera system in 2006 Jeep Commander. The hitch only has wiring for a round plug and not a flat pole, is there a converter that can be used for the camera? Also, is there a camera lock available for the class III hitch?
asked by: Eric
Expert Reply:
I assume the connector you have is a factory 7-Way. We do have adapters to convert from a factory 7-Way to a 4-Way in order to power the MasterLock camera. The adapter would be part # 47345 or part # PK12716. In case you do not have a 7-Way at the rear of the Commander, I have added a link to our wiring adapter fit guide so you can find the right adapter.
One of the pictures on the product page for the 4843DAT shows the camera installed in a 2 inch hitch on a Mercury Mountaineer equipped with a tow package. If your connector looks like the one in the picture one of the above adapters will work.
Any locking hitch pin that is meant for a Class III and up 2 inch hitch will work for this camera. You could use something like part # 7683.
expert reply by: Patrick B

Have a question for the experts? click here.
Products Referenced in This Question
Adapter 7 Pole to 4 Pole with Tester and Cover
Product Summary:
Wiring Adapters
Single Function Adapter
Product Specs:
Plug Only
7 Blade
4 Flat
Pollak 7 Pole to 4 Pole Connector Adapter
Product Summary:
Wiring Adapters
Single Function Adapter
Product Specs:
Plug Only
7 Blade
4 Flat
Product Page this Question was Asked From
Solid Blue Screen and Blinking Light on Master Lock Backup Camera on 2012 Chevrolet Silverado
Backup Camera Recommendation for Mounting on a 27 ft Trailer
Storing Names for Phone Numbers for Bluetooth Capable 2011 Chevy Silverado
Alternative Installation of Master Lock Wireless Back Up Camera on Rear of Fifth Wheel
Washed Out Image on Monitor for the Master Lock Wireless Backup Camera and Hitch Alignment System
Maneuverability of Camera on Master Lock Back Up Camera System Part # 4843DAT
Orientation of Lens on Master Lock Back Up Camera Part # 4843DAT When Used in Receiver
Will The Master Lock Wireless Backup Camera Withstand the Elements When Installed in the Hitch
Can I Hardwire Master Lock Backup Camera part # 4843DAT To Prevent Interference with Light Monitor
What is the Angle of the Field of Vision of MasterLock Wireless Backup Camer Part # 4843DAT