Is Weight Distribution Recommended for Draw-Tite Hitch 75471 on a 2008 Hyundai Santa Fe

Expert Reply:

If you are using the Draw-Tite Hitch, # 75471, you cannot use it with weight distribution because it is not rated or recommended by the manufacturer. None of the available hitches allow the use of weight distribution. I would say that the Air Helper Springs would not be needed for this application as what you plan on towing is not so heavy as to warrant air springs. Air springs could be used to help with sagging at the rear of the vehicle, but they will not add extra towing capacity or help with trailer sway. For trailer sway you could use a friction bar. I have included a link to friction bars below.

When pulling 50 percent or more of your vehicle weight, it is also a good idea to use a brake controller. Using a brake controller allows you to stop more efficiently and in less time. It also helps relieve strain on vehicle brakes and makes towing much safer. I recommend the Tekonsha P2, # 90885. It is one of our highest rated brake controllers. You will also need Brake Controller 7 and 4 Way Installation Kit, # ETBC7, and Tow Ready Custom Fit Vehicle Wiring, # 118415 to complete installation. I have included an FAQ on brake controller wiring from scratch.

expert reply by: Michael H