Question:
I have a 2001 Hyundai SantaFe which I will have a 5 pole connector because the stop and turn lights are on separate poles. The trailer has the two on one pole and has a 4 pole connector. What do I need to do? Thanks Bob
asked by: Robert N
Expert Reply:
Instead of using the 5 pole connector, you will need a T-1 Connector, part # 118473. The T-1 connector has a tail light converter that combines the brake and directional signals onto one circuit for the left side of the trailer, and one for the right side.
This will allow you to tow any trailer with a 4-pole connector.
expert reply by: Mike L
Products Referenced in This Question
Product Page this Question was Asked From
Adapter 4 Pole to 5 Pole Trailer Wiring Adapter
Product Summary:
Wiring Adapters
Single Function Adapter
18 Inch Long
Product Specs:
Plug and Lead
4 Flat
5 Flat
Adding a 5-Way Flat Trailer Connector to a 2003 Land Rover Discovery IITrailer Lights Come On But Brake and Turn Signals Do Not Work Using 4-Flat with 5-Flat ConnectorWill the Tow Ready 4 Pole to 5 Pole Adapter Work on a 2008 Ford EdgeCan a 4-Way Trailer Connector be Plugged Into a 5-Way Vehicle End Trailer ConnectorParts Needed For 1999 Ford Taurus Wagon With Separate Stop and Turn Lights to Tow Trailer With 4-WayHooking Up Adapter 4 Pole to 5 Pole # 20036 To 2002 Ford WindstarCan Adapter 4 Pole to 5 Pole Trailer Wiring Adapter, # 20036 Be Used on a 1996 Ford ExplorerHow to Troubleshoot a Tail Lamp Malfunction on a 16 foot Trailer Pulled by a 2005 Jeep CherokeeWhich Wire Is For The Reverse Lights On 2001 Dodge Grand CaravanHow To Connect 4-Pole Flat Vehicle Connector On Jeep Liberty To 5-Pole Flat Boat Trailer Connector
Instructions for 118473
