Today we are going to be installing Hidden Hitch part number 87409 on a 2002 Toyota Land Cruiser. This installation also applies to Draw-Tite part number 75095. We are underneath the vehicle now and we are going to go ahead and point out the location for the mounting of the hitch. As you can see on the drivers side frame rail, we have got a tow hook and a tie-down bracket here that are held on with two bolts. Those bolts need to come down, and these two items are going to be removed. These will provide the two rearmost attaching points for the hitch on the drivers side. And there is also a weld nut a little bit further up on the frame, and that will provide the forwardmost attaching point. And then over here on the passengers side, again we have a tie-down bracket that is going to need to be taken down - removed with these two bolts, and those will provide two of the attaching points for the hitch here on the passengers side. The third attaching point is actually a little bit inboard. And the third attaching point is here on the inboard side in this crossmember, just a little bit inboard of the exhaust, it would be this hole here. We are actually going to fish a carriage bolt down through this opening here at the back side. So, in order to actually gain access to this, we are going to need to remove this rear fascia support as well.